Apple pectin-based active films to preserve oil: Effects of naturally branched phytoglycogen-curcumin host.

Pectin has excellent film-forming properties, but its functional properties need to be enhanced. Therefore, we constructed naturally branched phytoglycogen (PG) nanoparticles to solubilize curcumin (CCM) and further enhance the properties of apple pectin-based active films. The size of the PG spherical particles ranged from 30 to 100 nm with some aggregates. The branch density of the PG was 6.02 %. These PG nanoparticles increased the solubility of CCM nearly 1742-fold and a nanosized phytoglycogen-curcumin (PG-CCM) host was formed via hydrogen bonding and hydrophobic interaction. This host promoted the formation of pectin-based films with a dense structure and increased their tensile strength to 23.51 MPa. The coefficient to water vapor permeability, oxygen permeability and carbon dioxide permeability were all decreased indicating their barrier performance were improved. Among them, the oxygen permeability coefficient decreased most, from 1.14 × 10-7 g·m-1·s-1 to 0.8 × 10-7 g·m-1·s-1. Also, the transmittance of the active film at 280 nm and 660 nm decreased to 0.65 % and 72.10 %. Antioxidant and antibacterial properties were significantly enhanced (P < 0.05). And the results showed this film was an excellent oil packaging material. The active film incorporating PG-CCM host can replace heat-sealed plastic bags/pouch made from polyethylene and polypropylene synthetic plastics, and solve the problem that plastic packaging is difficult to degrade and cannot be squeezed clean. This provides a new conceptual framework for developing pectin-based active films by incorporating of PG and CCM.

Choline chloride-based deep eutectic solvents as plasticizer and active agent in chitosan films.

The growing concern over extending the shelf life of food products, coupled with the escalating environmental impact of synthetic plastic waste, has fuelled a quest for bio-based alternatives in packaging research. In response to this pressing need, our study delves into the synthesis of chitosan-based films incorporating a deep eutectic solvents (DES). Choline chloride and diverse hydrogen bond donors were used as plasticizers, we also explored the active properties of DES integrated into the chitosan (Ch) matrix. The Ch-based films with chlorine chloride: citric acid can prevent the mold spotting up to 29 days longer in comparison to bread wrapped in polyethylene films (PE). The obtained Ch/DES films exhibited mechanical properties comparable to conventional PE (e.g., up to tensile strength of 26 MPa and up to 210% in case of elongation at break). This synthesis approach represents a significant stride towards environmentally friendly packaging materials, aligning with the principles of green chemistry.

Characterization of active films based on chitosan/polyvinyl alcohol integrated with ginger essential oil-loaded bacterial cellulose and application in sea bass (Lateolabrax japonicas) packaging.

The poor mechanical properties, low water-resistance, and limited antimicrobial activity of chitosan (CS)/polyvinyl alcohol (PVA) based film limited its application in aquatic product preservation. Herein, bacterial cellulose (BC) was used to load ginger essential oil (GEO). The effects of the addition of BC and different concentrations of GEO on the physicochemical and antimicrobial activities of films were systematically evaluated. Finally, the application of sea bass fillets was investigated. Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction analysis (XRD) analysis indicated dense networks were formed, which was verified by enhanced physical properties. The mechanical properties, barrier properties, and antimicrobial activities enhanced as GEO concentration increased. CPB0.8 (0.8 % GEO) film had better tensile strength (TS) and barrier performance, improved the quality, and extended the shelf-life of sea bass for another 6 days at least. Overall, active films are potential packaging materials for aquatic products.

Multifunctional packaging film with sustained release behavior triggered by pH microenvironment for efficient preservation of pork.

To tackle microbial contamination and spoilage during pork storage, transportation, and sales, a novel packaging film with exogenously driven controlled release behavior was designed through the demand-directed preparation of the emulsion of shellac-encapsulated cinnamaldehyde nano-capsules (SNCs) and the ingenious integration of chitosan (CS) film matrix. Among them, the SNCs were synthesized using the solvent exchange method, allowing controlled release of cinnamaldehyde (CA) in response to volatile alkaline substances present in the meat. The electrostatic interaction between SNCs and CS molecules improved the thermal stability, water resistance, tensile strength, and viscosity of the film-forming solution, while the CA in SNCs enhanced UV resistance and antimicrobial properties of the film. Notably, the CS film with SNC-100 loaded (CSNCs-100 film) achieved 99% inhibition against both E. coli and S. aureus, regulated environmental moisture, and prolonged the freshness duration of pork by an impressive six days.

Preparation and characterization of active films based on oregano essential oil microcapsules/soybean protein isolate/sodium carboxymethyl cellulose.

This study aimed to prepare oregano essential oil microcapsules (EOMs) by the active coalescence method using gelatin and sodium alginate as wall materials and oregano essential oil (OEO) as the core material. EOMs were added to the soybean protein isolate (SPI)/sodium carboxymethyl cellulose (CMC) matrix to prepare SPI-CMC-EOM active films, and the physical and chemical features of the active films and EOMs were characterized. The results showed that the microencapsulated OEO could protect its active ingredients. Scanning electron microscopy results showed that EOMs were highly compatible with the film matrix. The solubility of active films decreased upon adding EOMs, and their ultraviolet resistance and thermal stability also improved. When the added amount of EOMs was 5 %, the active films had the best mechanical properties and the lowest water vapor permeability. The active films prepared under this condition had excellent comprehensive performance. Also, adding EOMs considerably enhanced the antioxidant of the active films and endowed them with antibacterial properties. The application of the SPI-CMC-EOM films to A. bisporus effectively delayed senescence and maintained the freshness of the postharvest A. bisporus. This study provided a theoretical foundation for the incorporation of EOMs into active films based on biological materials.

Characterization of Sodium Alginate-Based Films Blended with Olive Leaf and Laurel Leaf Extracts Obtained by Ultrasound-Assisted Technology.

Due to environmental concerns, there is an increasing need to reduce the use of synthetic and non-renewable packaging materials to reduce waste and increase sustainability. This study aimed to characterise sodium alginate edible-based films (SA) incorporated with laurel leaf extract (LLE) and olive leaf extract (OLE) obtained by ultrasound-assisted extraction. Determination of total phenolic content, antioxidant, and antimicrobial activity was performed for the extracts and films. Also, thickness, tensile strength, elongation at break, modulus of elasticity, opacity and colour, moisture content, water vapour permeability (WVP), Fourier-transform infrared spectroscopy (FTIR) spectra, and surface morphology by scanning electron microscope (SEM) analyses were performed for the films. LLE yielded better results in terms of phenolic content (195 mg GAE/g), antioxidant (2.1 TE/g extract) and antimicrobial activity (MIC at 1% for Listeria monocytogenes and Staphylococcus aureus, and 1.8% for Enterococcus faecalis). For the films, the simultaneous incorporation of LLE 1% (w/v) and OLE 1% (w/v) resulted in a significant reduction of approximately 2 log CFU/g against S. aureus. The addition of LLE and OLE extracts also proved to improve barrier properties (lower WVP for SA films with LLE 1% + OLE 1%, 3.49 × 10-11 g m-1 s-1 Pa-1) and promoted changes in resistance and flexibility. The results demonstrated that active alginate-based films can be valuable for enhancing food preservation.

Physicochemical and antioxidant properties of tannic acid crosslinked cationic starch/chitosan based active films for ladyfinger packaging application.

In the present study, cationic starch (CS)/chitosan (CH) incorporated with tannic acid (TA)(CSCT) eco-friendly films were prepared by employing an inexpensive solvent casting technique. Influence of TA on the physicochemical and antimicrobial properties of CS/CH polymer matrix were studied. The FTIR findings and homogeneous, dense SEM micrographs confirms the effective interaction of TA with CS/CH polymer matrix. CSCT-3 active film displayed tensile strength of 26.99±1.91 MPa, which is more substantial than commercially available polyethylene (PE) (12-16 MPa) films. The active films exhibited excellent barrier properties against moisture and water, supported by increased water contact angle values (86.97±0.29°). Overall migration rate of active films was found to be below the permitted limit of 10mg/dm2. The active films showed around 56% of degradation in soil within 15 days. Besides, the active films showed concurring impact against food borne pathogens like E. coli, S. aureus and C. albicans. The CSCT-3 active film presented 90.83% of antioxidant capacity, demonstrating the effective prevention of food oxidation related deterioration. Ladyfinger packaging was inspected to examine the ability of active films as packaging material resulted in effectively resisting deterioration and extending shelf life in comparison with traditional PE packaging.

Films Based on Biopolymers Incorporated with Active Compounds Encapsulated in Emulsions: Properties and Potential Applications-A Review.

The rising consumer demand for safer, healthier, and fresher-like food has led to the emergence of new concepts in food packaging. In addition, the growing concern about environmental issues has increased the search for materials derived from non-petroleum sources and biodegradable options. Thus, active films based on biopolymers loaded with natural active compounds have great potential to be used as food packaging. However, several lipophilic active compounds are difficult to incorporate into aqueous film-forming solutions based on polysaccharides or proteins, and the hydrophilic active compounds require protection against oxidation. One way to incorporate these active compounds into film matrices is to encapsulate them in emulsions, such as microemulsions, nanoemulsions, Pickering emulsions, or double emulsions. However, emulsion characteristics can influence the properties of active films, such as mechanical, barrier, and optical properties. This review addresses the advantages of using emulsions to encapsulate active compounds before their incorporation into biopolymeric matrices, the main characteristics of these emulsions (emulsion type, droplet size, and emulsifier nature), and their influence on active film properties. Furthermore, we review the recent applications of the emulsion-charged active films in food systems.

Preservative effect of gelatin/chitosan-based films incorporated with lemon essential oil on grass carp (Ctenopharyngodon idellus) fillets during storage.

The present study investigated the effect of fish gelatin/chitosan-based (FG/CS-based) films incorporated with lemon essential oil (LEO) on grass carp fillets in terms of moisture status, total volatile basic nitrogen (TVB-N), and microbial community succession during chilled (4 °C) and iced (0 °C) storage. Low-field nuclear magnetic resonance (LF-NMR) revealed that the active films remarkably inhibited moisture transformation from being the immobilized to free water in grass carp fillets, accompanied with the reduced T22 relaxation time. Besides, magnetic resonance imaging (MRI) detected a higher density of proton in the treated fish samples, indicating that the active films could improve the water-holding capacity of fish samples. Moreover, high-throughput 16S rRNA sequencing suggested that the FG/CS-based films loaded with LEO efficiently decreased the relative abundance of the bacterial genera Shewanella and Aeromonas in grass carp fillets, with minimal accumulation of TVB-N during storage. Additionally, the low storage temperature (0 °C) could further enhance the preservative effect of the active films on the fish samples, which together prolonged their shelf-life to 18 days. Overall, the combination of the active films and iced storage could provide a promising strategy to preserve grass carp fillets.

Nanoliposomal delivery systems of natural antibacterial compounds; properties, applications, and recent advances.

Todays, nanoliposomes (NLPs) are considered as one of the most efficient nanocarriers to deal with bacteria, practically in food products. These nanodelivery systems are able to be loaded with different bioactive compounds. The main aim of this review is investigating recent approaches (mostly from the years of 2018 to 2022) regarding development of nanoliposomal natural antibacterial compounds. In this regard, NLPs alone, combined with films, coatings, or fibers, and in coated forms are reviewed as advanced delivery systems of antibacterial substances. Moreover, a robust and comprehensive coverage of the morphological and physical properties of formulated NLPs as well as their interactions with antibacterial substances are discussed. The importance of NLPs to encapsulate antibacterial ingredients, advantages and drawbacks, antibacterial pathways of formulated NLPs, and comparison of them with pure antibacterial bioactive compounds are also explained.

Preparation and characterization of carboxymethyl chitosan/pullulan composite film incorporated with eugenol and its application in the preservation of chilled meat.

To solve the problem of easy spoilage of chilled meat during storage, we fabricated a novel composite film using carboxymethyl chitosan (CMCS)/pullulan (Pul)/eugenol (E) by casting method. The results showed that the mechanical properties of the films were better when the CMCS/Pul ratio was 2.5/2.5. The Fourier transform infrared spectroscopy (FTIR) results showed that intermolecular hydrogen bonds were formed among E, CMCS, and Pul, which was consistent with the rheological test results. Scanning electron microscopic (SEM) images showed that eugenol was well dispersed in the CMCS/Pul matrix. The addition of eugenol significantly increased the antibacterial properties and antioxidant properties. Moreover, when 5% eugenol was added, the water vapor permeability (WVP) of the film reduced to 2.41 × 10-11 g/m·s·Pa. Finally, the freshness of the chilled meat wrapped with the eugenol-containing composite film was prolonged, thereby offering a potential alternative to synthetic materials.

Active Films Based on Starch and Wheat Gluten (Triticum vulgare) for Shelf-Life Extension of Carrots.

The use of biodegradable biopolymers with the incorporation of active ingredients has been considered as an alternative to extend the useful life of food. Therefore, the objective of this research was to develop active films based on starch and wheat gluten, containing cinnamon and turmeric essential oils by using the solvent casting method. Different film formulations were made from wheat starch, gluten, glycerol, and essential oils of cinnamon and turmeric. The films were characterized according to their morphology, optical, thermal, antioxidant, and barrier properties. Subsequently, the active properties on baby carrots regarding weight loss, appearance, and fungal growth were evaluated. The results indicated that the starch-based films showed a slight decrease in moisture content with the addition of essential oils (up to 13.29%), but at the same time showed a significant reduction in water solubility (up to 28.4%). Gluten-based films did not present significant differences in these parameters, although the solubility in water tended to increase (up to 13.15%) with the addition of essential oils. In general, the films presented good thermal stability and antioxidant capacity, and in the carrot coating test, a decrease in weight loss of up to 44.44% and 43.33% was observed for the coatings based on starch and gluten with the addition of turmeric essential oil, respectively. Finally, films developed with cinnamon and turmeric essential oils are potential candidates for the design of biodegradable active packaging.

The Caucasian Whortleberry Extract/Myrtle Essential Oil Loaded Active Films: Physicochemical Properties and Effects on Quality Parameters of Wrapped Turkey Breast Meat.

In this research work, the effects of myrtle essential oil (MEO) and Caucasian whortleberry extract (CWE) as natural additives were investigated on mechanical, physico-mechanical and antimicrobial properties of gellan/polyvinyl alcohol (G/PVA) film. Then, optimal blend active films were used for the wrapping of turkey breast meat stored at low temperature (4 ± 1 °C) for 15 days and chemical and sensory properties of wrapped meats were evaluated. The addition of MEO and CWE decreased tensile strength and increased the strain at the break of the films (p ≤ 0.05). Additionally, with increasing the amount of MEO and CWE, the permeability to water vapor (WVP) and the moisture content (MC) of the films decreased (p ≤ 0.05). MIC test showed that MEO and CWE were effective against S. aureus, E. coli, S. typhimurium, and P. fluorescens. at the concentrations of 5-6 and 15-17 mg/mL, respectively. Different microbiological, chemical, and sensory tests indicated that active films significantly enhanced the shelf life of turkey breast meat (p ≤ 0.05). Therefore, based on our finding in this study, the use of these active and biodegradable packagings can be effective and useful for protecting the microbial and sensory quality of turkey breast meat.

Double-Layered Films Based on Furcellaran, Chitosan, and Gelatin Hydrolysates Enriched with AgNPs in Yerba Mate Extract, Montmorillonite, and Curcumin with Rosemary Essential Oil.

Double-layered active films based on furcellaran (1st layer-FUR), chitosan, and gelatin hydrolysates (2nd layer-CHIT+HGEL) were successfully prepared. Bioactive ingredients were added to the 1st film layer: AgNPs, which were synthesized in situ with yerba mate extract; montmorillonite clay (MMT); and different loads of ethanolic curcumin (CUR) extract enriched with rosemary essential oil (REO). SEM images confirmed the presence of AgNPs with a size distribution of 94.96 ± 3.33 nm throughout the films, and AFM and SEM photos indicated that the higher substance concentrations had rougher and more porous film microstructures. However, the water vapor transmission rate was reduced only at the lowest load of this ingredient. Despite the tensile strength of the films having decreased, the incorporation of the compounds showed a tendency towards reducing the modulus of elasticity, resulting in a lower stiffness of the composites. The addition of CUR and AgNPs improved the UV light barrier properties of the materials. The presented films showed quick reactions to changes in the pH value (from orange to red along with an increase in pH from 2 to 10), which indicates their potential use as indicators for monitoring the freshness of food products. Composite No. 2 showed the highest antimicrobial potential, while none of the presented films showed an antifungal effect. Finally, the antioxidant activities of the films increased dramatically at higher AgNP and CUR loads, suggesting an outstanding potential for active food packaging applications.

Active edible films based on green tea extract and gelatin for coating of fresh sausage.

The objective of this work was to develop, characterize and evaluate the application of active edible films based on gelatin and green tea extract in coating of fresh sausages. The green tea extract showed IC50 of 0.088 mg/mL and minimum inhibitory concentrations of 0.05 mg/mL for Listeria monocytogenes, 0.025 mg/mL for Staphylococcus aureus, 0.04 mg/mL for Escherichia coli, and >1.0 mg/mL for Salmonella enterica serovar Choleraesuis. The formulation with 15% (w/v) of gelatin and 30% (w/w) of glycerol showed better adhesion and appearance in the coating of the product. When using 1.0% of green tea extract, the lowest IC50, was obtained and the antioxidant activity was maintained for 35 days. There was a more accentuated decrease in pH and an increase in acidity and peroxide index in fresh sausages without film compared to those coated with the active film (1.0% of green tea extract) during storage. In addition, it was found that the use of active gelatin film (1.0% of green tea extract) kept the TBARS indexes of fresh sausage samples lower than the standard (without coating) and of films containing only gelatin, after 48 days of storage.

Valorization of Amaranth (Amaranthus cruentus) Grain Extracts for the Development of Alginate-Based Active Films.

This research work investigates the development of alginate-based films incorporating phenolic compounds extracted from Amaranthus cruentus grain using different solvents. Alginate, glycerol, and amaranth grain phenolic compounds at various concentrations were used to produce the films. An experimental Central Composite Rotatable Design (CCRD) was used to evaluate the effect of these variables on different film's properties, i.e., water vapor permeability, hydrophobicity, moisture content, solubility, thermal, mechanical, and optical properties. This study demonstrated that high phenolic compound content and antioxidant capacity were obtained from amaranth grain using ethanol as the extraction solvent. Alginate films incorporating amaranth phenolic compounds were successfully manufactured, and this study can be used to tailor the formulation of alginate films containing amaranth phenolic compounds, depending on their final food application. For example, less flexible but more resistant and water-soluble films can be produced by increasing the alginate concentration, which was confirmed by a Principal Component Analysis (PCA) and Partial Least Squares (PLS) analysis. This study showed that active alginate films with amaranth phenolic compounds can be tailored to be used as food packaging material with potential antioxidant activity.

Non-covalent small molecule partnership for redox-active films: Beyond polydopamine technology.

HYPOTHESIS: The possibility to use hexamethylenediamine (HMDA) to impart film forming ability to natural polymers including eumelanins and plant polyphenols endowed with biological activity and functional properties has been recently explored with the aim to broaden the potential of polydopamine (PDA)-based films overcoming their inherent limitations. 5,6-dihydroxyindole-2-carboxylic acid, its methyl ester (MeDHICA) and eumelanins thereof were shown to exhibit potent reducing activity. EXPERIMENTS: MeDHICA and HMDA were reacted in aqueous buffer, pH 9.0 in the presence of different substrates to assess the film forming ability. The effect of different reaction parameters (pH, diamine chain length) on film formation was investigated. Voltammetric and AFM /SEM methods were applied for analysis of the film redox activity and morphology. HPLC, MALDI-MS and 1HNMR were used for chemical characterization. The film reducing activity was evaluated in comparison with PDA by chemical assays and using UV stressed human immortalized keratinocytes (HaCat) cells model. FINDINGS: Regular and homogeneous yellowish films were obtained with moderately hydrophobic properties. Film deposition was optimal at pH 9, and specifically induced by HMDA. The film consisted of HMDA and monomeric MeDHICA accompanied by dimers/small oligomers, but no detectable MeDHICA/HMDA covalent conjugation products. Spontaneous assembly of self-organized networks held together mainly by electrostatic interactions of MeDHICA in the anion form and HMDA as the dication is proposed as film deposition mechanism. The film displayed potent reducing properties and exerted significant protective effects from oxidative stress on HaCaT.

Natural bioactives in perspective: The future of active packaging based on essential oils and plant extracts themselves and those complexed by cyclodextrins.

Aiming to attend to consumers' increasing demand for synthetic additives-free food products (stimulated by personal preferences or health concerns), the food industry has been trying to introduce natural bioactive compounds as food preservatives. In this respect, the development of active food packaging incorporated with natural compounds could be of great interest. However, this scenario still has some particularities that can hinder its application in the food industry, such as relatively reduced stability and, in some cases, undesirable sensorial properties. Cyclodextrins showed up as an option to circumvent these drawbacks by forming inclusion complexes that can protect the active compounds and perform their controlled release for contact with packaged food. For industrial manufacturing of active packages based on naturally occurring bioactive compounds, inclusion complexation can be considered one of the most promising alternatives. Therefore, this review summarizes the potential of nanotechnology in active food packaging by applying cyclodextrins as a carrier for natural active compounds, which can be provided by conventional sources and alternatively (and cost-effectively) agro-food by-products. The present study will benefit prospects for exploring cyclodextrins in active food packaging, which industrial application, without a doubt, will increase in the coming years.

Effect of Chitosan Nanoparticles Incorporating Antioxidants from Salvia hispanica L. on the Amaranth Flour Films.

Research background: Amaranth (Amaranthus hypochondriacus) flour produces films with excellent barrier properties against water vapor, allowing food preservation, but the mechanical properties are poor compared to synthetic films. One strategy to improve these properties is the incorporation of nanoparticles. The particles can also serve as a vehicle for the addition of antioxidant agents into the films. The objective of this work is to optimize the formulation for the preparation of amaranth flour films treated with antioxidant chia (Salvia hispanica L.) extract-loaded chitosan particles using response surface methodology (RSM). Experimental approach: Chitosan nanoparticles with the extract were synthesized by ionic gelation, and the films were made by the casting method. Three independent variables were assigned: amaranth flour (4-6%), glycerol (25-35%) and chitosan nanoparticles loaded with the chia extract (0-0.75%). We then evaluated the physical (thickness), mechanical (tensile strength, Young´s modulus and elongation), barrier (water vapor permeability, moisture and water solubility) and antioxidant properties of the films. The experimental results of the properties were analyzed using a Box-Behnken experimental design generating 15 runs with three replicates at the central point. Results and conclusions: Second and third order polynomial models were obtained from the ANOVA analysis of the evaluated responses, and high coefficients of determination were found (0.91-1.0). The water vapor permeability of the films was 0.82-2.39·10-7 (g·mm)/(Pa·s·m2), tensile strength was 0.33-1.63 MPa and antioxidant activity 2.24-5.65%. The variables had different effects on the films: glycerol negatively affected their properties, and the permeability values increased with increased amaranth flour content. The nanoparticles improved the mechanical, barrier and antioxidant properties of the films compared to the films without nanosystems. The optimal formulation was 4% amaranth flour, 25% glycerol and 0.36% chitosan nanoparticles. The optimized films had better mechanical (1.62 MPa) properties, a low water vapor permeability value (0.91·10-7 (g·mm)/(Pa·s·m2)) and moderate antioxidant activity (6.43%). Novelty and scientific contribution: The results show the effect of chitosan nanoparticles on the properties of amaranth flour films for the first time. The resulting equations are useful in the design of food packaging.

Application of bi-layers active gelatin films for sliced dried-cured Coppa conservation.

Processed meat products have been increasingly consumed, a highlight being dried-cured coppa, commonly purchased sliced, making it more susceptible to bacterial deterioration and lipid oxidation. The aim of this work was to produce and apply bi-layers films based on gelatin (in both layers) with addition of nisin and/or Pitanga leaf hydroethanolic extract (PLHE) only in the food contact thinner layer, in order to evaluate their effect on the refrigerated storage of sliced dried-cured coppa. Dried-cured coppa slices covered with active films were vacuum-packaged and stored under refrigeration for 120 days. Every 30 days, samples were tested for moisture content, water activity, pH, color parameters, lipid oxidation by TBARS and peroxide index methods, and microbiological analysis. The different film formulations presented no influence on the water activity, pH and color parameters of sliced dried-cured coppa. However, they significantly affected moisture content, bacterial count and lipid oxidation. The addition of both active compounds - nisin and PLHE - in the food contact thinner layer was observed to have the most favorable effect.